Getting Started with Your Zubie OBD Device is Simple
1. Install Your Device
- Find the OBD-II diagnostic port.
- Firmly push the device into the port* and wait for 3 minutes. You should see lights on the device during this time.
- After 3 minutes, turn your vehicle on and allow the vehicle to idle for a few moments.
2. Check that Your Device is Set Up
- Open app.zubie.com on your browser or download Zubie (app store/google play).
- Sign in using your registered email account.
- Check that your vehicle is visible on the live map.
Common Troubleshooting
- If you don’t see lights on your device when it is installed, you may need to press the device more firmly into the OBD-II port.
- If you don’t see your vehicle on the live map, you may need to take a trip. Be sure to drive somewhere with strong cell service and a clear view of the sky.
*Using the Zubie stealth installation Y-Cable? Follow these instructions to install your OBD device using the Y-cable.
Possible OBD-II port locations:
If you cannot find the port, check the vehicle owner’s manual.